Stainless Steel Standard Centrifugal Pump
XZS stainless steel standard centrifugal pump is a new generation centrifugal pump used to transfer various mediums including water and industrial liquid. It is suitable for different temperatures, flow rates and pressure ranges. This pump is made by using advanced techniques such as pressing bulging welding for corrosion resistant plate, as a good substitute for traditional IS pumps and common anticorrosion pumps.
Our stainless steel standard centrifugal pumps have found many applications. Typical applications are as follows:
Water supply: water filtration and transfer in waterworks, pressure increase in main pipes
Industrial pressurization: flow wetting system, cleaning system
Transportation of industrial liquid: boiler water supply, condensed system, cooling & air condition system, machine tool support, light acid and alkali transportation
Water treatment: distilled water system or separator, swimming pool, etc.
Irrigation for the agricultural industry
Petrochemical industry, medical industry and more
Features of Stainless Steel Standard Centrifugal Pump
Nice appearance
Light weight, compact structure
High efficiency, energy saving
Corrosion resistance
Low noise
Identification Codes
Cross Section
Operating Conditions
Thin, clean, non-flammable and explosive liquids, with solid no particles and fibers
Liquid temperature: -20℃ ~ +100℃
Ambient temperature: up to +40℃
Altitude: up to 1000m
Max. Pressure of the system: 10bar
Motor
TEFC motor, 2-pole
Protection class: IP55
Insulation class: 155
Standard voltage: 50Hz, 1×220V, 3×380V×220V
Installation Requirements of Stainless Steel Standard Centrifugal Pump
It is comprised of pump, pump shaft and standard motor. The pump and the shaft are joined directly.
The pump should be installed on the ventilating and anti-freezing place.
The pump should be installed in a way that the pump will not be influenced by the tension of the pipeline.
If the pump is installed outdoors, it must equip a suitable outer cover to prevent electric components from water inflow or dew.
During installation, enough space should be left around the pump unit to facilitate inspection and maintenance.
Electric wiring device protect the pump from being damaged by lack of phase, unstable voltage, current leakage or overload.
The pump should be installed on the pedestal horizontally. Horizontal direction is the inlet for the pump, and vertical direction is the outlet for the pump.
Guidelines to Performance Curves
Tolerance to ISO 9906, Annex A.
All curves have been made with 3×380V and the constant speed of 2850rpm.
Measurements have been made with airless water at a temperature of 20℃ and kinematic viscosity of 1mm2/s.
Refer to the performance range for the operation of the pump to prevent the motor from overloading caused by too large of a flow rate.
Table of Materials
Part | Material | Reference Standard | |
1 | Motor | ||
2 | Pump head | HT200 | ASTM25B |
3 | Guarding plate | 0Cr18Ni9 | AISI304 |
4 | Shaft | 2Cr13/0Cr18Ni9 | AISI420/AISI304 |
5 | Rubber parts | NBR | |
6 | Lining of pump head | 0Cr18Ni9 | AISI304 |
7 | Mechanical seal | Carbon/Silicon Carbide | |
8 | Impeller | 0Cr18Ni9 | AISI304 |
9 | Pump body | 0Cr18Ni9 | AISI304 |
10 | Base plate | Q235 | ASTMA570 |
Formed in 2001, LEO is an experienced manufacturer of stainless steel standard centrifugal pumps. We supply a wide spectrum of water pumps and garden machines, such as submersible pumps, garden shredders, lawn mowers, electric scarifiers, and so on. Our products are GS, CE, UL, ETL, CB, EMC and EMF certified, and are increasingly used in many industries such as chemical, pharmaceutical, power, mining, effluent treatment, and construction etc.
For more detailed product information, please browse our website or contact us directly.